You Position: Home Products PET Blow Molding Machine Detail

1100-3300Bottles|hour,Max.5L PET Bottle Blowing Machine

Model No.: ZQ-A Series  Trademark: ZQ Logo 
Place of Origin: Huangyan,China  Delivery Date: 40 Days 
Packing: General Packing  Payment Type: T/T & L/C 
Certificates: CE,ISO9001  Export Markets: All World 


ZQ-A series, Automatic Stretch Blowing Machine With Preform Manual Loading
ZQ-A series
, newly developed by our company, is a two-step automatic blow-molding machine, which requires labor to put performs into the preheater only. ZQ-A series is of one cavity and the maximum cavity of the bottles is 0.6L,2.0L,5L. It can blow various bottles in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET, PP etc.

Compared with other full-automatic series, ZQ-A series has no automatic conveyer, so it can’t transfer performs automatically, but requires labors to put performs into preheater. The distinctive feature of the ZQ-A is as follows: it has saved the cost to the maximum extent; it has lower rejection rate, higher production, and more stable performance than the semi-automatic one, and moreover, it is easy to run. Therefore, it will take the place of the semi-automatic blow-molding machine.

a).PLC colour display: OMRON(JAPAN)
b).Pneumatic parts:AIRTAC(TAIWAN)
c).Controller of preform transfer:Servo motor DELTA(TAIWAN)
d).Other electric parts are all world-famous brand

A.     Stable performance with advanced PLC.
B.     Conveying preforms automatically with conveyor.
C.     Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
D.     High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
E.     High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
F.     No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
G.     Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
H.     Strong clamping force with high pressure and double crank links to lock the mold.
I.       Two ways of operating: automatic and manual.
J.     Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
K.     Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
L.     Contamination is avoided for the bottle body.
M.     Ideal effect of the chilling with the chilling system.
N.     Easy installation and starting
O.     Low rejection rate: less than 0.2 percent.

TYPE  ITEM ZQ-A600 ZQ-A600-2 ZQ-A600-3 ZQ-A1500
CONTAINER Number of cavity 1 2 3 1
Output 1100-1400
Max.container volume 0.6L 0.6L 0.6L 2.0L
Max.neck diameter 38mm 38mm 38mm 38mm
Max.container diameter 60mm 60mm 60mm 105mm
Max.container height 260mm 260mm 260mm 350mm
ELECTRICAL SYSTEM Number of lamp 14pcs 28pcs 32pcs 28 pcs
Max.heating power 9kw 22kw 32kw 22kw
Installation power 12kw 25kw 35kw 25kw
Actual power consumption 9kw 14kw 20kw 16kw
AIR SYSTEM Operatating pressure 7kg/cm2 7kg/cm2 7kg/cm2 7kg/cm2
Low pressure consuming 800Ltr/min 1000Ltr/min 1200Ltr/min 900Ltr/min
Blowing pressure 30kg/cm2 30kg/cm2 30kg/cm2 30kg/cm2
High pressure consuming


CHILLER WATER Operating pressure 5-6 kg/cm2 5-6 kg/cm2 5-6 kg/cm2 5-6 kg/cm2
Temperatuer 10 10 10 10
Consuming 3600kcal/hr 5600kcal/hr 7600kcal/hr 3600kcal/hr
Flow rater 20Ltr/min 30Ltr/min 40Ltr/min 20Ltr/min
MACHINE Machine dimension 2.5×1.4×1.70(m) 2.9×1.55×1.8(m) 3.4×1.4×1.80(m) 2.9×1.7×1.85(m)
Machine weight 1.5T 1.6T 1.9T 1.6T

TYPE  ITEM ZQ-A1500-2 ZQ-A1500-3 ZQ-A5000 ZQ-A5000-2
CONTAINER Number of cavity 2 3 1 2
Output 1700-2100
Max.container volume 2.0L 2.0L 5L 5L
Max.neck diameter 38mm 38mm 100mm 100mm
Max.container diameter 105mm 105mm 180mm 180mm
Max.container height 350mm 350mm 350mm 350mm
ELECTRICAL SYSTEM Number of lamp 28pcs 40pcs 28pcs 48pcs
Max.heating power 42kw 60kw 42kw 60kw
Installation power 44kw 65kw 44kw 63kw
Actual power consumption 28kw 40kw 30kw 40kw
AIR SYSTEM Operatating pressure 7kg/cm2 7kg/cm2 7kg/cm2 7kg/cm2
Low pressure consuming 1200Ltr/min 1600Ltr/min 1200Ltr/min 1600Ltr/min
Blowing pressure 30kg/cm2 30kg/cm2 30kg/cm2 30kg/cm2
High pressure consuming 2000-2500
CHILLER WATER Operating pressure 5-6 kg/cm2 5-6 kg/cm2 5-6 kg/cm2 5-6 kg/cm2
Temperatuer 10 10 10 10
Consuming 5600kcal/hr 7600kcal/hr 5600kcal/hr 5600kcal/hr
Flow rater 30Ltr/min 40Ltr/min 30Ltr/min 30Ltr/min
MACHINE Machine dimension 3.1×1.45×1.85(m) 4.2×1.60×1.90(m)


Machine weight 1.8T 2.3T 2.0T 3.0T

Note: The specifications are subject to change without notice for the further improvement.
!Note: Custom production accepted. Any client idea tried.


Tags:  Blowing Equipment, Automatic Blowing Machine, Plastic Bottle Blowing Machine, PET Bottle Making Machine, Plastic Bottle Making Machine, Hand Feeding Blow Molding Machine, Bottle Blowing Machine Manufacturer,


Please full out this form if you want to cooperate with our company, we will contact you as soon as possible...
Learn More>>

About Us

Established in 1989,Zhejiang East Zhouqiang Plastic & Mould Industry Co., Ltd(ZQ Machinery). is a sole subsidiary corporation of Hongkong East Lianfeng Internation Company Limited. Our corporation is located in Huangyan----Blow Molding Machine City in China, with total investment of 11 million US dollars and covers 50 thousand square meters. ...

Contact Us

Tel: 0086-576-84081678
Fax: 0086-576-84081662
ZQ Product Video
Product E-Catalogue